HOME*****COMPANY*****SERVICES*****PARTS*****MONTHLY TECH ARTICLE*****PHOTOS

HEAD TERMS*****FLOW CHARTS*****LINKS*****PROJECTS

Mitsubishi, Toyota, Subaru, Other
PARTS & SERVICE
 
Last updated 5/27/07
 
INTAKE GASKETS "HEAT SHIELD TYPE" (HONDATA): $60.00ea. In stock. No waiting. Click on gasket for further info.

TITANIUM RETAINERS: $225.00 Set of 16 Titanium Retainers.

HIGH LIFT SPRINGS: Call or email for your low price.

VALVE STEM SEALS: $28.00 Set of 16.  $16.00 for aftermarket.

GUIDES BRONZE TYPE: $11.00 ea. Custom Made.

INSTALL GUIDES: Call or email for your low price.
 
VALVE SEATS OVERSIZE FOR INTAKE SIDE:  $12.00 ea. Will accept up to 2mm over size valves.

INSTALL SEATS: Call or email for your low price.

STAINLESS STEEL VALVES: $14.00ea. .5mm and 1mm Black Nitride oversize valves. In stock no waiting! Custom sizes machined in house $39.00/valve

 

HEAD GASKETS: Cometic. Call or email for your low price.

Type R Valve Job

$325.00 (LABOR ONLY)
Complete visual inspection of complete head. Check all surfaces for straightness. Complete disassembly. Inspect parts for wear. Degrease and clean head of oils. OEM valve job, Resurface and hand lap head. Mill up to .010 off head surface. Reassemble complete head. Includes new valve seals.  ABOUT VALVE JOBS
 

Street Master Head Work 
Staring at $975.00
Free bronze valve guides and installation till JUNE 31st 2007
  
  • Complete visual inspection of complete head.
  • Check all surfaces for straightness.
  • Complete disassembly.
  • Inspect all valvetrain parts for wear.
  • Degrease and clean head of all oils.
  • Street port and polish which is: (bowl port, gasket match 1 inches into runners only. Polish, deshroud and debur all chambers.)
  • ALANIZ Max Flow valve job.
  • Resurface and hand lap head surface or up to .010 material removal.
  • Reassemble complete head.
  • Includes new valve seals.
     
    This is an exelent choice for those who want a better than stock head. Works well on N/A or turbo applications. Please click below to see what is done. Work shown is H22. This is what will be done to your RSX head for the price above. Additional work extra $$$.
     
    After extensive flow bench work , this is the best flow gains for the dollar. Joe Alaniz

                      

    Competition Head Work

      Starting at $1450.00 (Our most popular and best dyno figures for FORCED INDUCTION applications)

    • Complete visual inspection of complete head.
    • Check all surfaces for straightness.
    • Complete disassembly.
    • Inspect all valvetrain parts for wear.
    • Remove all studs and lap all surfaces.
    • Degrease and clean head of oils.
    • Baseline flow bench test.
    • Full Competition port and polish head.
    • Deshroud, polish and debur all chambers.
    • Competition valve job.
    • Resurface and hand lap head to customer specs, or up to .015 material removal.
    • Reassemble complete head.
    • Includes new valve seals.
     

    Info: eliasalaniz@hotmail.com

    phone: 310 808 9704

    •